basically you need to remove the nat inside or nat outside command from the interface, then clear the translations and then you can remove it
-----Original Message----- From: c1sc0k1d [mailto:[EMAIL PROTECTED]] Sent: 10 January 2002 20:00 PM To: [EMAIL PROTECTED] Subject: Re: %static entry in use, cannot remove [7:31560] clear ip nat trans ""paul"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > can anyone tell me how i go about removing a static entry from the router ?i > am using nat (#ip nat inside source static ) , however > when i remove that entry i get : %static entry in use, cannot remove . > that host is no longer up and i am running out of solutions, any suggestions > are obviously welcome ;) > thanx. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31619&t=31560 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]