Also make sure you get IOS 12.1+. client side DHCP (i.e. 'ip address dhcp') isn't supported until then. It's only part of "Easy IP Phase 2"
WAYNE BAETY, MCSE, A1C, USAF Network Systems Trainer > -----Original Message----- > From: Jim Bond [mailto:[EMAIL PROTECTED]] > Sent: Friday, January 11, 2002 4:20 AM > To: [EMAIL PROTECTED] > Subject: Re: DHCP coonection on Cisco Router [7:31559] > > Regarding your secondary IP, if you use NAT, this will > not work because you can't put both "ip nat inside" > and "ip nat outside" under 1 ethernet interface. > > A cheaper router will be a 1605, I guess. > > Jim > > --- "Steven A. Ridder" > wrote: > > 2514 supports 2 eth ints. > > > > or you may be able to get two cheap 2501's and > > string them together via > > serial. > > > > I've always wanted to try secondary addressing on 1 > > interface. The main > > would get it's IP via DHCP, and the secondary > > address would be the private > > IP. Always wanted to know if this would work. > > > > -- > > RFC 1149 Compliant. > > > > > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > > __________________________________________________ > Do You Yahoo!? > Send FREE video emails in Yahoo! Mail! > http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31623&t=31559 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]