use an extended ping and source the ethernet interface. I'm assuming you have connected these routers via serials.
Dave extended ping, type ping at router prompt and then hit return Stephane Wantou Siantou wrote: > > Hi everybody, > > I set up a network with 3 routers but I don't have hosts to connect to the > ethernet interfaces. Can anybody tell me how test connectivity between > two ethernet interfaces using ping or trace if there are no host attached > to those interfaces? > Thanks a lot, > Stephane -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31690&t=31690 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]