Hi all, I have a lab with a hub and spoke network,r1 is the hub and r2,r3,r4 are the spokes. IPX eigrp is running on the frame cloud and IPX rip on the edge. I am trying to make sure that only network 100 at r1 is advertised to r2 and not to the remaining routers r3 and r4. Can someone help me with the syntax for the access-lists asit's driving me mad. The network is addressed in the wan as follows: r1 serial 0.0.1 = 110.1.1.1 r2 serial 0/0 = 110.2.2.2 r3 serial 0/0 = 110.3.3.3 r4 serial 0/0 = 110.4.4.4 I have tried the following acls but without success: access-list 905 permit any 100 eigrp 110.0002.0002.0002 access-list 906 permit any 100 eigrp 110.0002.0002.0002 F.000f.000f.000f access-list 907 permit any 100 eigrp 110.0002.0002.0002 0.0000.0000.0000
What am I doing wrong chaps. Many thanks in advance Richard Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31720&t=31720 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
