Full instructions are at this webpage, but I'll summarize. http://www.cisco.com/warp/public/474/pswdrec_2600.shtml
Power Cycle the router, and Press Ctrl-Break within 30 seconds of powering it back up. You should go to a Prompt rommon>. type confreg 0x2142 Press enter type reset, press enter. Wait for the router to reboot. Type the following enable copy start runn config term configura 2102 enable secret newenablepassword line vty 0 4 password newtelnetpassword line con password newconsolepassword copy runn start Let me know if you need help, -Ejay -----Original Message----- From: Johnson, Richard (NY Int) [mailto:[EMAIL PROTECTED]] Sent: Monday, January 14, 2002 7:44 AM To: [EMAIL PROTECTED] Subject: Wiping a config w/o en password [7:31838] Hi All, How do I trash a config on a 2611 w/o the en password. Thanks, Rich Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31846&t=31838 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]