Hi, Can someone help with configuring protocol based vlans on a 6000/6500 switch.
Currently we have configured these subnet based vlans using: Created 2 vlan interfaces (vlan1 and vlan2) on the MSFC and assigned different subnets to each vlan interface. Then individually assigned ports 2/1-48 to vlan1 and 3/1-48 to vlan2. However this is a static configuration. The need is that once the vlan interfaces are configured there should not be a need to manually assign ports to respective vlans on the switch (CatOS) Is there a way to configure dynamic ports. Will "set port membership 3/1 dynamic" do the trick. Are there are any restrictions, like trunk ports cannot be set as dynamic ports, or vlan trunks should be running 802.10 and not ISL?? Any help will be greatly appreciated.... Thanks ... Rick Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31870&t=31870 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
