You need to use policy-based routing for this. You can find plenty of information on CCO about this, but here's a link to get you started.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/ 122cgcr/fqos_c/fqcprt1/qcfpbr.htm Watch out for the wrap, that's a long link. HTH, John ---- On Tue, 15 Jan 2002, Joy Wang ([EMAIL PROTECTED]) wrote: > Hi Guys, > > Is there a way to setup a static route on a cisco router so that packets > going to the same target get forwarded to different interfaces/addresses > according to the source addresses? > > Your help is greatly appriciated. > Joy Wang [EMAIL PROTECTED] > > ________________________________________________ Get your own "800" number Voicemail, fax, email, and a lot more http://www.ureach.com/reg/tag Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32114&t=32108 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]