Try configuring "speed 9600" under the line aux 0. I do not believe you can use a straight cable, I thiink it has to be rolled.
Also, are you sure port 2065 is the right port number? It sounds high, but that may be correct... Rob. ""Joaquim Lopes"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, i'm trying to configure a switch without ip remotely. > > I have the router AUX port connected to the switch Console port via > Roll-cable > When i try to connect i've got : > > RouterXPTO#1.1.1.1 2065 > Trying 1.1.1.1, 2065 ... Open > > > But i can't type anything ....(newbie problems ) > > -------------- > Router configuration > interface Loopback0 > ip address 1.1.1.1 255.255.255.0 > no ip directed-broadcast > line aux 0 > no exec > no activation-character > terminal-type VT100 > transport preferred none > transport input all > > > One last thing, can i use a straigth cable to do the connectio ? > Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32236&t=32206 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]