No, you don't loopback any of the interfaces. Configure one of the t-1 ports for clock source line and the other as clock source internal. Then check your cable. A t1 crossover is not the same as an ethernet crossover.
A t1 crossover is 1-4 and 2-5. Good luck, ejay ...Cisco Consultant for sale or rent. E-mail off list if you need help. -----Original Message----- From: Emily Lee [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 11:37 PM To: [EMAIL PROTECTED] Subject: How to Configure 2-routers back to back via T1/CSU/DSU [7:32403] All, I am trying to configure 2-2600 routers that have integrated T1 CSU/DSU WAN interfaces. I am using a crossover cable connecting the 2 routers back to back. From reading, I understand I need to enable the loopback command, but I have found several and none are working so far. I am using the 2 routers to learn more on router configurations since I dont have much hands on. So I am using them only for practice at home. Thanks for any help. __________________________________________________ Do You Yahoo!? Send FREE video emails in Yahoo! Mail! http://promo.yahoo.com/videomail/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32461&t=32461 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]