Well..I've never even seen a 1201 but if it supports rip as a routing protocol, then that should tell you it does layer 3... Don't get confused though... Routing protocols have nothing to do with what layer of the OSI model a device operates on. A switch running just on layer 2 may have the abillity to have multiple segments coming into it, but can not pick packets up from 1 layer 3 network and place them on another layer 3 network. A switch that can operate on layer 3 doesn't have to run rip/ospf/eigrp/etc...to do it. Static routes will work just fine.
-Patrick >>> "Steven A. Ridder" 01/21/02 14:54 PM >>> Why do they call a 1201 a L3 switch? What L3 functions can it do besides RIP? -- RFC 1149 Compliant. FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32775&t=32606 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]