Here's a link on CCO that indicates the pinouts! http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2500/2524/ boa/boapin.htm#21253
Watch the word wrap! HTH Stefan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sim, CT (Chee Tong) Sent: Tuesday, January 22, 2002 7:59 AM To: [EMAIL PROTECTED] Subject: ISDN connector PIN configuration [7:32802] Our Telecom only install the ISDN line on their krone block and end it with a pair of wire. Can we need to patch the pair of wire into a RJ45 connector (not RJ11 ) and connect it to the ISDN U interface port and make it work. But I am not sure about the PIN configuration of the connector. Is that middle two pins , pin 4 and pin 5 like normal phone wire. ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=32806&t=32802 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
