No, Eric, it doesn't reboot. In fact, I have put the NM 2V on my 3660 router also and same problem occurs!
Thanks, Sujal ----- Original Message ----- From: Erick B. To: Sent: Friday, January 25, 2002 1:38 PM Subject: Re: NM 2V [7:33166] > When the problem occurs, does the router reboot > itself, output any errors on the console (exception > faults, segV, etc)? > > I'd capture all the errors if there are any, show > tech, and open a case. > > --- "Sujal G. Ajmera" > wrote: > > Eric: > > > > I have the required memory - 64mb and the cards were > > working alright for > > about 3 months or so. > > > > This problem is since 2 weeks only. > > > > Thanks, > > > > Sujal > > ----- Original Message ----- > > From: Erick B. > > To: > > Sent: Friday, January 25, 2002 12:47 PM > > Subject: Re: NM 2V [7:33166] > > > > > > > Hi, > > > > > > Plug your modules, IOS, etc into the 2600/3600 > > memory > > > calc tool and see if you have enough memory to > > support > > > the modules. > > > > > > > > > http://www.cisco.com/cgi-bin/Support/MemCalc/mem-calc.pl > > > > > > --- "Sujal G. Ajmera" > > > wrote: > > > > Hi, > > > > > > > > On a 3640 router, I have put an NM 2V with 2 VIC > > FXS > > > > cards. > > > > > > > > These voice cards give a problem when they're > > BOTH > > > > in the module in that the > > > > router freezes or the voice card doesn't > > disconnect. > > > > > > > > Independently they work beautifully. > > > > > > > > Any thoughts on this? > > > > > > > > TIA > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Great stuff seeking new owners in Yahoo! Auctions! > > > http://auctions.yahoo.com > > [EMAIL PROTECTED] > > > > > __________________________________________________ > Do You Yahoo!? > Great stuff seeking new owners in Yahoo! Auctions! > http://auctions.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33176&t=33166 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]