I know it used to be the case that you couldn't connect to the ANI server for the first 5 minutes or so. Not done much with it for 18 months now and this was with CWSI 5.2 (from distant memory) so not sure if that's the case now. I rebuilt a few times before finding this out. Waited 5 minutes and all was OK. Probably not this simple but thought I'd mention it.
Gaz ""Sasa Milic"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Usual problem with ANI is that host where it is running must be > configured in DNS. It doesn't help if you put it in local hosts > file; campus manager wants is asking DNS server to resolve the > name of ANI server. > > Sasa > CCIE #8635 > > > Dandi Darsana wrote: > > > > Dear all, > > > > I have problem with my Ciscoworks 2000. It running under Windows NT ver.4, > > Service Pack 6. Everytime I try to run Campus Manager, I always get error > > message: > > "Cannot connect to ANI Server." > > I have checked and rechecked the settings in ANI Server. Everything seemed > > OK. The ANI Server status is "Running but busy flag set." > > I have also checked the ANIServer.log file. I see the status is idle. > > Actually I have tried to reinstall the CiscoWorks 2000, and I also install > > it into 2 different Windows NT machines. But I always get the same problem. > > I also install Resource Manager Essentials, Device Fault Manager, Device > > Manager, Content Flow Monitor, etc, into the same machines with no problem > > at all. > > Thank you very much for your help. > > > > Best Regards, > > Dandi Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33251&t=33251 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
