All, I have a hub and spoke setup, r1 is the hub and r2,r3,r4 are the spokes.
r1 has a multipoint subif and r2,r3,r4 have p2p subif's. The ospf net running in the wan between r1,r2,r3,r4 is 10.128.10.0/24 WAN r1 ser0/0.1 multipoint = 10.128.10.1/24 r2 ser0/0.1 p2p = 10.128.10.2/24 r3 ser0/0.1 p2p = 10.128.10.3/24 r4 ser0/0.1 p2p = 10.128.10.4/24 LAN ( static nats ) r1 e0/0 is 192.168.1.1/24 natted to 10.128.10.9 r3 e0/0 is 192.168.3.1/24 natted to 10.128.10.11 r4 e0/0 is 192.168.4.1/24 natted to 10.128.10.10 All configs look correct, but a ping to a nat address is only possible from the spokes inwards to the hub, not from the hub outwards or even from spoke to spoke. Is there an issue here with subifs? I get the %encapsulation failed % error when perfoming a ping from the hub to spoke using debug ip packet. Any help would be appreciated. Cheers Richard Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33424&t=33424 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
