If your bootroms are at least 10.0 (I think, been awhile) the bootloader is available. IOW you need not cahnge the config reg and reload the box, the bootloader does it for you.
Dave McHugh Randy wrote: > > Can anyone please tell me if there is an eisier less disruptive way to > upgrade the IOS on Cisco 2500 than this URL explains without changing the > config register and going into RX boot mode. > Here is the procedure I found on the TAC: > > http://www.cisco.com/warp/customer/130/sw_upgrade_proc_flash.shtml#first > > This is a 2524 running only 11.1 and I am going to upgrade the flash from > 8mg to 16mg and try to upgrade to some version or revision of 12.x . > > Thank you, > Randy -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33492&t=33455 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
