Brian, Did you try without pool statement, vpdn group 1 client configuration address local pptp-pool
It will use its current ip. Make sure to nat 0 from inside to client's ip. -Keyur Shah- CCIE# 4799 (Security; Routing and Switching) css1,ccna,ccda,scsa,scna,mct,mcse,mcp+i,mcp,cni,mcne,cne,cna Hello Computers "Say Hello to Your Future!" http://www.hellocomputers.com Toll-Free: 1.877.794.3556 "Now offering CCIE Security Lab Workbook and remote bootcamp, http://www.hellocomputers.com/hellosuccess.html"; -----Original Message----- From: Brian Wilkins [mailto:[EMAIL PROTECTED]] Sent: Monday, January 28, 2002 1:19 PM To: [EMAIL PROTECTED] Subject: PIX VPDN Static IP addresses [7:33503] Does anyone know if there is a way to specify static IP addresses using PPTP on a PIX firewall? It works fine using a pool defined on the PIX, but I can't seem to find a way to configure static addresses using PPTP. Thanks, Brian Wilkins Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33553&t=33503 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
