Do you have an Enable Secret password set? The Enable password is mainly
still around for support of older IOS code. Cisco is trying to move
everyone to using Enable Secret.
Have you tried typing out the full command: enable password password?
What is your configuration register set to 0x2102 or 0x2142? If is set to
0x2142, the router will ignore the startup-config which contains the Enable
and Enable Secret passwords.
If that does not fix the problem, I am out of ideas.
--
"Through Complexity there is Simplicity,
Through Simplicity there is Complexity"
David L. Blair - CCNP, CCNA, MCSE, CBE, A+, 3Wizard
""Washington Rico"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I appreciate any information you may have..
>
> I have a 3600 was IOS version 12.0.7 and I was trying to create the enable
> password. I believe I did it correctly but the router does not hold the
> enable password, it just goes directly into enable mode when I type
> ("enable"). Even after I create an enable password, anyone know why?
>
> The Syntax I entered is below
> (
> config t
> en password password
> )
>
>
> Thank in advance..
>
>
>
> _________________________________________________________________
> お店よりも気軽に！好きなモノ好きなだけ見られる MSN
ショッピング
> http://shopping.msn.co.jp/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=33679&t=33645
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
