Greetings,
I have the following scenario:
area 0 (backbone)
|
|
|
area 20 (stub network) (these are RiverStone MLSs)
|
|
uBR routers (static routing)
I would like to set up OSPF between the Riverstones and the Cisco uBRs. We
thought to set up the uBRs as stub networks also, but we are seeing the full
OSPF routing table on the uBRs (which are already running high utilization).
We would only like to see the default route on the uBRs. So would we need to
set these up as NSSA or Totally stubby? Or should we create a "new" area and
make that a stub of the existing area 20? We have experimented with
filtering and we are able to filter out everything but the default, but I
don't think we should have to do that either.
Right now our lab equipment is in the process of being moved to our new
building so I can't program this up right now to test.
Thanks for the assist!!!
Debbie Westall
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=34375&t=34375
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
