Kick yourself.......now......Serial Interface

""Casey, Paul (6822)""  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Make sure the dulplex is set correctly, full/half etc.
>
>
> > -----Original Message-----
> > From: Tom Martin [SMTP:[EMAIL PROTECTED]]
> > Sent: 05 February 2002 15:58
> > To:
> > Subject: Re: Interface errors [7:34461]
> >
> > Joaquim,
> >
> > I had a similar problem with CRC and Frame alignment errors that turned
> > out to be a bad CSD/DSU.  It looks like you might be experiencing this
as
> > well, especially given the number of interface resets.
> >
> > - Tom
> >
> > In article , "Joaquim Lopes"
> >  wrote:
> >
> > > Hi, what could cause this errors?
> > >
> > >
> > > Serial0/0 is up, line protocol is up
> > >   Hardware is DSCC4 Serial
> > >   Internet address is 10.172.1.2/30
> > >   MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
> > >      reliability 255/255, txload 1/255, rxload 3/255
> > >   Encapsulation PPP, loopback not set
> > >   Keepalive set (10 sec)
> > >   LCP Open
> > >   Listen: CDPCP
> > >   Open: IPCP
> > >   Last input 00:00:00, output 00:00:00, output hang never Last
clearing
> > >   of "show interface" counters 2w4d Input queue: 0/75/337
> > >   (size/max/drops); Total output drops: 21 Queueing strategy: weighted
> > >   fair
> > >   Output queue: 0/1000/64/21 (size/max total/threshold/drops)
> > >      Conversations  0/60/256 (active/max active/max total) Reserved
> > >      Conversations 0/0 (allocated/max allocated)
> > >   5 minute input rate 29000 bits/sec, 8 packets/sec 5 minute output
rate
> > >   12000 bits/sec, 9 packets/sec
> > >      13153011 packets input, 1756696209 bytes, 0 no buffer Received 0
> > >      broadcasts, 0 runts, 0 giants, 4066 throttles 3230 input errors,
> > >      222 CRC, 3008 frame, 0 overrun, 0 ignored, 0 abort 12955327
packets
> > >      output, 2923854785 bytes, 0 underruns 0 output errors, 0
> > >      collisions, 160 interface resets 0 output buffer failures, 0
output
> > >      buffers swapped out 0 carrier transitions DCD=up  DSR=up  DTR=up
> > >      RTS=up  CTS=up
> > >
> > > Thanks
> > > Joaquim Lopes
> > > misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=34477&t=34461
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to