Configuration | User Management | Groups | Modify For the group under IPSEC you need to specify the authentication method (Internal, NT Domain, Radius, SDI, etc) in addition to labeling it an "external" group.
once you do this if it still will not work, then do some debugs under Configuration | System | Events | Classes for all 3 auth's Joseph Brunner ASN 21572 MortgageIT MITLending New York, NY 10038 (212) 651 - 7695 Voice (212) 651 - 7795 Fax -----Original Message----- From: Jim Bond [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 05, 2002 5:50 PM To: [EMAIL PROTECTED] Subject: Concentrator 3030 RADIUS authentication [7:34537] Hello, I'm trying to set up authenticating groups externally through RADIUS. I created a group and changed the type to "External". On my RADIUS server (Safeword 5.1), I created a group with the same name on 3030. Users couldn't get authenticated. On 3030 log, it said user unspecific. Any thoughts? Thanks. Jim __________________________________________________ Do You Yahoo!? Send FREE Valentine eCards with Yahoo! Greetings! http://greetings.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34547&t=34537 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]