Ohhhhhhhhh Gawd !!! I don't like the look of this.
HyperT is a drop down menu and 4800 isn't on the list. Can I get this bit rate into hyperT somehow ? Phil. --- Daniel Cotts wrote: > bit 12 = 0, bit 11 = 1 so 4800 > Watch the wrap. See: > http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/cis2000/c2000 > qs/22812.htm > > > -----Original Message----- > > From: Phil Barker > [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, February 06, 2002 3:31 PM > > To: [EMAIL PROTECTED] > > Subject: I changed my config reg to 0x2C02 yikes > !!! [7:34679] > > > > > > Hi group, > > I've changed my config register to 0x2C02 from > the > > default 0x2102. > > > > I was only meaning to change the console speed but > > inadvertantly change the broadcast to all 0's (I'm > not > > worried about the latter). > > > > So I have a bit setting for the speed of 01 > whereas it > > used to be 00 or 9600 bps. What speed does 01 > > represent. Is it 19200 bps ? > > > > I was trying higher values earlier in hyperT but I > > don't have access to the router until tomorrow. > > > > Regs, > > > > Phil. > > > > __________________________________________________ > > Do You Yahoo!? > > Everything you'll ever need on one web page > > from News and Sport to Email and Music Charts > > http://uk.my.yahoo.com > [EMAIL PROTECTED] > > __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34710&t=34679 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]