I'm using this old MultiTech modem bank to set a reverse telnet session via a 2511. The modem setup commands are: modem inout modem autoconfigure discovery transport input all
This works but when dialing in from my laptop's modem to the multitech to gain access to the 2511, it takes forever for the 2511 to respond. It does eventually, after like some 90 seconds, but it shouldn't take that long or should it? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34820&t=34820 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
