Mike, What kind of routers and IOS where you trying to use to bond the T1s together? I am about to try it with two PTP t1s on a 2650.
Please let me know...... Scott -----Original Message----- From: Michael Williams [mailto:[EMAIL PROTECTED]] Sent: Friday, February 08, 2002 11:18 AM To: [EMAIL PROTECTED] Subject: RE: p-t-p serial w/ diff subnet address al points [7:34741] I have seen the same thing. However, I've only seen it when the P-To-P link is setup using MultilinkPPP. We tried many times to configure a Multilink PPP point-to-point pipe (usually 2 or 3 T1s bonded together) with IPs in the same /30 subnet and could not get things to work. But as soon as we put IPs in different subnets on either end, it worked fine. Still don't know why........ Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34890&t=34741 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]