So which commands is correct then? Cisco2503(config)#ip default-gateway 0.0.0.0
This is my router on the 10.0.0.0 network Or Cisco2503(config)#ip default-gateway 192.168.0.0 (DSLRouterNAT)192.168.0.1--------------192.168.0.2(Cisco2501)100.0.0.1------ -100.0.0.2(Cisco2503)---10.0.0.1 How to make a server in 10.0.0.0 see the internet? 10.0.0.2 is the server IP wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I am taking a stab here trying to visualize what you are talking about. But > if you are not doing any routing on the routers outside of statics do you > have ip default-gateway set? Yes when you are not doing routing like eigrp > and ospf you use the default gateway command. > Maybe this will help. > > > > > Mixa > > cc: > Sent by: Subject: Need Cisco expert help > [7:34894] > > nobody > > > > 02/08/2002 > 02:54 > PM > > Please > respond > to > > Mixa > > > > > > > Thanks for all your help with my previous post. I'll give it a try tonight. > Here is my current situation. I have 3 networks: > 192.168.0.0 > 100.0.0.0 > 10.0.0.0 > > Network 1: 192.168.0.0 > > I have 2 Cisco 2500s, two different win2k domains. i'll like to simulate a > real network but things are not working. Here is my configuration: > > I have a DSL router/switch 4 ports with a default IP 192.168.0.1 and NAT. > This segment is 192.168.0.0. In this segment, i have one WIN2K server call > WIN2KAD1 this server can see the internet because it's IP address is > 192.168.0.2. I put static IP for it with local DNS 127.0.0.1. In this > segment, i have one Cisco router 2501 connected to the DSL router/switch > and > it's Ethernet E0 has an IP address of 192.168.0.3. It has IOS 12.5. This is > my 192.168.0.0 network. > > Network 2: 100.0.0.0 > The 2 routers connected to each other using a back-to-back cable. No frame > relay this time. This network is 100.0.0.1 connected to the serial S1 of > the > first Cisco2051. The second Cisco2503 serial1 is connected to the first one > using back-toback cable and its IP address is 100.0.0.2. > > > Network 3: 10.0.0.0 > > On the E0 side of the Cisco 2503, its IP address is 10.0.0.1 and i > connected > a crossover cable to my other Win2k box and this box has an IP 10.0.0.2. > > What I did? > > I used route add on the first Win2k box so that 192.168.0.0 can talk to > 100.0.0.0 and 10.0.0.0 > I configured static route on both of the cisco router so that network > 10.0.0.0 can talk to 192.168.0.0 and 100.0.0.0 > > All communications are working. I can ping everything from every subnet. > But > I CAN NOT SURF the web from my 10.0.0.0 network. What am i doing wrong > here? > > I know this is a long post but please give it a shoot. > > Thanks, > Mixa Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34902&t=34894 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]