Hi ,
I have not worked much on the 2500 series
I have corrupted my IOS in cisco 2509 , it is giving me the following
output , once I go to the Rommon mode , as my router does not come to the
enable mode as hangs at that point .
>
>dev
Missing value
>dir flash:
F: FC4AFC4A -> FFFFFFFF
>
What are the commands for me to load a new image of IOS in the 2500
series , in the 2600 series , we get the rommon> prompt and can give the
commands
In this router it is giving me the following commands on help :
>?
$ Toggle cache state
B [filename] [TFTP Server IP address | TFTP Server Name]
Load and execute system image from ROM or from TFTP server
C [address] Continue execution [optional address]
D /S M L V Deposit value V of size S into location L with modifier M
E /S M L Examine location L with size S with modifier M
G [address] Begin execution
H Help for commands
I Initialize
K Stack trace
L [filename] [TFTP Server IP address | TFTP Server Name]
Load system image from ROM or from TFTP server, but do not
begin execution
O Show configuration register option settings
P Set the break point
S Single step next instruction
T function Test device (? for help)
Please let me know the correct sequence of commands I should give to
upload a new image from the TFTP server .
thanks in advance .
--
Navin Parwal
[EMAIL PROTECTED]
********************************
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=34958&t=34958
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
