The Catalyst 4000 series has the ability to perform L3 switching/routing! See the link below for details!
http://www.cisco.com/warp/public/473/28.html Stefan -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of JEK Sent: Saturday, February 09, 2002 11:12 AM To: [EMAIL PROTECTED] Subject: Re: Layer 3 configuration from CAT4000 CWI [7:34736] I believe that the 8500/6500/6000/5500/5000 are the only Cat's that will do L3 switching/routing. HTH. - jek "Cisco Breaker" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I know that you can create VLAN or enable a port from CWI software inside > the CAT4000. Is it possible to configure layer3 routing (if you have the > module SUP3) from the CWI of the CAT4000? Because my customer doesnt want to > buy CiscoWorks2000 for only one switch. > > Best regards, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=34970&t=34736 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
