Greog,
That's exactly what I tried. :) I will give it another shot and
separate the ports. Thanks!
- Sean
-----Original Message-----
From: Georg Pauwen [mailto:[EMAIL PROTECTED]]
Sent: Sunday, February 17, 2002 12:47 AM
To: [EMAIL PROTECTED]
Subject: RE: Not allowed to use 802.1q and ISL at the same time
[7:35655]
Hi Sean,
I am not sure if you try to use ISL and 802.1q on adjacent ports, but the
8500 has the following VLAN Encapsulation Restrictions:
The four adjacent ports (such as 0-3 or 4-7) on a 10/100 interface must all
use the same VLAN encapsulation, that is, either 802.1Q and native, or ISL
and native.
Hope this helps.
Regards,
Georg
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=35659&t=35659
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
