OK, Finally got it to work!! Thank you so much Sasa and the rest of you for helping me out.
Here is what I did: (for others who might have a similiar problem) 1. Set the #config-register to 0x2101......Reloaded 2. Did a #erase flash....Deleted the 2nd partition 3. Did a #partition flash 1 16 4. Erased the flash #erase flash 5. Set an #ip default-gateway and ip tftp source-interface cmd. 6. Did a #copy tftp flash.....Bingo it worked beautifully!!! :-) Thank you all once again for your help. >From: Sasa Milic >To: Cisco Nuts >Subject: Re: 16MB Flash (Read) & (Read/Write) on a 2524 ?? [7:35989] >Date: Wed, 20 Feb 2002 17:47:01 -0800 > > > > Erase and Unpartition flash...Which one?? Not clear on this > > Is this what I do? And would you mind if you clarified step # 3. > >When you try to erase flash, with "erase flash:", it will show >you two partitions, one with the image, and will ask for a >confirmation to delete the file. When both partitions are empty, >you can go into config mode, and type "no partition flash", or >"partition flash 1 16". > >Be sure to save old image and config ! > >Hope this helps. > >Regards, > Sasa ------------------------------------------------------------------------ Join the worlds largest e-mail service with MSN Hotmail. Click Here Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36043&t=36043 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
