I am not completely sure, but I do not believe these two cards will interoperate. The PA-POS is a packet-over-Sonet module. Thus that box will look to frame the layer 2 frames as POS frames - and it will use the entire OC-3 for the one POS connection. The PA-A3 is an ATM module. It is looking to fill it with ATM 53-byte ATM cells, and it is expecting to divide the OC-3 bandwidth between whatever SVCs or PVCs have been created.
Just my thoughts - Rob. ""Alejandro Acosta"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello, > I am about to purchase a Fiber Optic Interface; because this kind of > cards are pretty expensive I prefer to ask you in order do not buy the wrong > interface. > Can I connect this two cards: PA-POS-OC3SMI and PA-A3-OC3SMI?. We are > going to use single mode fiber and it is Mid Range. > > Thanks in advanced. > > Alejandro Acosta Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36412&t=36366 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]