Chris Headings wrote: > The router is setup with these sub-interfaces and the proper encapsulation. > Has anybody used an HP Procurve 4000 and created trunks that pass the proper > dot1q vlans to the router? The customer is way in over their head and we > have never used HP switching gear. > > If not an answer than a link pertaining to trunking for the HP product would > be greatly appreciated.
Look at ftp://ftp.hp.com/pub/networking/software/59692320.pdf (the docs for the 4000M), especially page 6-62 & up. Basically, they just have to assign the same port to both VLANs and make them both 'tagged'. That should work. (Note, I haven't seen a Procurve in my life. If I could find this in roughly a minute or so...) Regards, Marco. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36717&t=36711 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
