well, that's not my problem. I have to find a general way to find whether a remote IP box is a router or a switch. That IP box can be of any vendor. and that remote box can be located across multiple networks.
----- Original Message ----- From: Larry Letterman To: Sent: Thursday, February 28, 2002 3:07 PM Subject: RE: detect routers and switches [7:36873] > if its cisco gear, do a show cdp neighbor detail and it should show you > whats on the other end... > > > Larry Letterman > Cisco Systems > [EMAIL PROTECTED] > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > ashish > Sent: Thursday, February 28, 2002 2:30 PM > To: [EMAIL PROTECTED] > Subject: detect routers and switches [7:36873] > > > Hi, > this question is bit vauge.But thought you guys will surely be able to help > me > out :-) > > is there any way to tell programmatically , whether a remote box is a router > or a switch. > > Thanks, > Ashish Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36898&t=36873 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]