Holá Alfredo, si tienes dos connexiónes a la misma destinación (CarrierA y CarrierB), me parece que lo mejor que puedes hacer es configurar el atributo 'weight'. Puedes usar listas de acceso, route maps, o el 'neighbor weight command'. Hay un ejemplo muy bien en el sitio web siguiente:
http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/icsbgp4.htm#xtocid2043919 Busca por 'BGP Decision Algorithm', entonces 'Weight Attribute'. Recuerdos, Jorge Hi Alfredo, if you have two different connections (CarrierA and CarrierB) to the same destination, it would be best to configure the weight attribute. You can use either access lists, route maps, or the 'neighbor weight command' to achieve this. There is a very good example on the Cisco site, go to: http://www.cisco.com/univercd/cc/td/doc/cisintwk/ics/icsbgp4.htm#xtocid2043919 Look for 'BGP Decision Algorithm' and then for the 'Weight Attribute' link. Regards, Georg Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36953&t=36947 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
