Yes but there are caveats. You cannot do an all inclusive static mapping to a PAT interface but you can redirect certain traffic based on port to specific inside hosts.
For example, if you only have a single outside address and you are using it on your outside interface, not only can you use PAT with the "interface" command, but you can then redirect traffic to a specific host(s) depending on requested TCP/UDP port. In other words, you can redirect all inbound traffic destined for TCP port 25 to your mail host inside while all other traffic inbound is denied while still using PAT for all of your outbound traffic. If you want more info, search for "port redirection" on CCO. Rik -----Original Message----- From: Ivan [mailto:[EMAIL PROTECTED]] Sent: Saturday, March 02, 2002 2:31 AM To: [EMAIL PROTECTED] Subject: PIX PAT Problem!! Urgent [7:37052] Hi all, That is Very very Urgent!!!Please Help!!! Does anyone know that Can Cisco Pix Pat Ouside address to Inside address? for exampe: |-----------205.11.1.0-----------| | | (outside Security L 0) (----------PIX----------) (-Inside security L100) | | |--------------10.1.1.0-----------| can 205.11.1.0 255.255.255.0 PAT to 10.1.1.100?? Thank you very much for your kindly help!!!! ivan Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37085&t=37052 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
