Hi "ME" I will have a look down the local pc store to find some 72pin 16Mb Simm Module.
Thanks for the info...... ""ME"" wrote in message news:[EMAIL PROTECTED].; > The 1600's use old 72pin pc simms. Find one 16mb or less and your good to > go. > > ""Matt Saunders"" wrote in message > news:[EMAIL PROTECTED].; > > Hi all, > > > > Ive just recently brought a Cisco 1603R which came with a 4Mb Flash Card & > > 8Mb of Ram and im desperate to connect it to my other router (2503) which > is > > running IOS (tm) 2500 Software (C2500-D-L), Version 12.0(9a) so i can > > practise some commands etc. > > > > When i boot the 1603R i get the following:- > > > > System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) > > Copyright (c) 1999 by cisco Systems, Inc. > > > > Simm with parity detected, ignoring onboard DRAM > > > > System Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc1) > > > > Copyright (c) 1999 by cisco Systems, Inc. > > > > C1600 platform with 8192 Kbytes of main memory > > > > program load complete, entry point: 0x2005000, size: 0x2e4e0d > > > > Self decompressing the image : > > ################################################# > > > > ####################################################################### > [OK] > > > > Cisco Internetwork Operating System Software > > > > IOS (tm) 1600 Software (C1600-NY-M), Version 12.1(6), RELEASE SOFTWARE > (fc1) > > > > Copyright (c) 1986-2000 by cisco Systems, Inc. > > > > Compiled Wed 27-Dec-00 14:24 by kellythw > > > > Image text-base: 0x02005000, data-base: 0x0260D624 > > > > cisco 1603 (68360) processor (revision C) with 7680K/512K bytes of > memory. > > > > Processor board ID 26436386, with hardware revision 00000004 > > > > Bridging software. > > > > X.25 software, Version 3.0.0. > > > > Basic Rate ISDN software, Version 1.1. > > > > 1 Ethernet/IEEE 802.3 interface(s) > > > > 1 Serial(sync/async) network interface(s) > > > > 1 ISDN Basic Rate interface(s) > > > > System/IO memory with parity disabled > > > > 8192K bytes of DRAM onboard > > > > System running from RAM > > > > 7K bytes of non-volatile configuration memory. > > > > 4096K bytes of processor board PCMCIA flash (Read/Write) > > > > SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE! > > > > > > > > On the side of the flash card it says Version: 12.0(14), Image: > > c1600-y-mz.120-14, Filename x00028c4. > > > > I gather the image is run from RAM and ive looked at the cisco website > which > > says that the above image is compatible with the memory i have got though > it > > seems to me that the router is loading something different. > > > > Im sure i must be missing something here and any help would be greatfully > > received. > > > > Regards > > > > Matt > > > > (UK) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37086&t=37082 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]