You need to assign your ports to a vlan based on your configuration below.
-----Original Message----- From: Matt Fisher [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 2:41 PM To: [EMAIL PROTECTED] Subject: Setting up Catalyst 6500 as a Layer 2 switch [7:37177] I'm trying to setup a Cat 6500 running IOS 12.1 (c6sup22-dsv-mz.121-8a.E5) as a layer two switch and I'm running into some issues. I have a group of ports all on the same vlan, with "switchport" set to enable them as layer 2 switch ports. Directed IP traffic flows fine, but broadcast traffic is not flowing between the ports. The short story of the problem. In this test environment I have 5 NT servers plugged into the Cat 6500 and they can't see each other view "Network Neighborhood". My current goal is to just get this switch to act like your basic unmanaged switch (I'll work on the more interesting settings after I get this basic functionality working.) Any ideas what I might be missing? Matt ! Example of the current configuration: interface FastEthernet2/1 no ip address switchport ! interface FastEthernet2/2 no ip address switchport ! interface Vlan1 ip address 192.168.0.1 255.255.255.0 no ip route-cache cef no ip mroute-cache Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37188&t=37177 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
