Have you console-connected to it and monitored it for a while to see if anything unusual is happening?
----- Original Message ----- From: "Ismail Al-Shelh" To: Sent: Wednesday, March 06, 2002 9:44 AM Subject: 1750 Router [7:37396] > Hello all > I have 1750 router , I just take it out from the box , when I turn it on it > works fine for a 15 mutinies after that it stop responding to me > when I turn it off and turn it on again all the LEDS remain on which is > > > Front panel > > PWR SLOT0 SLOT1 SLOT2 > PORT0 PORT0 PORT0 > ON ON ON ON > > OK PORT1 PORT1 PORT1 > ON ON ON ON > > > Rear status > > ON ON ON ON ON ON > ON > SLOT 1 OK SLOT 0 OK FDX 100 LINK PVDM OK SLOT 2 OK > > Its staying like that as much as the router button is on , I do not know > what's going on with me nowadays I feel I have no luck with any thing. > > Note : I did not yet connect the router to any thing I was in the beginning > to fix the modules , please help > > Ismail Al-shelh > > [GroupStudy.com removed an attachment of type application/ms-tnef] _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37427&t=37396 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]