Just so happens I have one in the lab I just set up between a 7507 and a 12008. As you can see there is not much to it. Set one side for clocking and rock n roll. I have no shaping defined so I have a full OC3.
Dave 7507 interface ATM0/1/0 ip address 100.1.1.1 255.255.255.192 no ip directed-broadcast no ip mroute-cache atm clock INTERNAL atm sonet stm-1 atm ilmi-keepalive no atm enable-ilmi-trap pvc madgsr 1/32 encapsulation aal5snap ! 12008 interface ATM4/0 ip address 100.1.1.2 255.255.255.252 no ip directed-broadcast atm pvc 1 1 32 aal5snap no atm ilmi-keepalive no atm enable-ilmi-trap ! "Bullock, Jason" wrote: > Guys, > > I have been reading on the list for sometime, and I am always in awe. > Anyone out there know a quick and dirty trick to configure a point to point > ATM OC3 between two cisco routers? > > the line is offered by verizon and I am using 2 7500 cisco routers. > > help..... > > thanks! > > jason -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications Inc. 612-664-3367 [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37619&t=37587 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]