I don't know about the phantom DLCIs causing trouble, but your service provider will neet to turn them off if you are running LMI.
Naafi Matovu wrote: > > I've got a 2500 with two subinterfaces configured on > serial1.serial1.1 has DLCI 16 with point to point config, > serial 1.2 has DLCI 17 with point to point config. Howerver > when i run show frame-relay lmi i get the above pvcs plus two > other(DLCI18 & 26) on serial1. I think these are being > automaticaly detected. Iam getting packet loses between this > router and the next hop router. I belive it could be because of > the extra DLCIs that have been detected and probably over > loading the circuit. How can i disable the undefine two PVC if > they are the ones causing the packet being lost. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37907&t=37906 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]