I wonder what would happen if you cleared your route cache? Cisco Nuts wrote: > > Hello, > Is there a timelimit on how long a router keeps the static nat > entries in > its buffer EVEN though you take out the entries from the router? > I can still ping the ip's from other routers even though I took > out the > entries on the nat router. I would think that this would only > be possible if > the router keeps the entries in its buffer but am not sure?? > Thank you. > Regards. > > Output: > NAT Router: > RTB#sh ip nat trans > RTB# > RTB#sh ip nat statis > Total active translations: 0 (0 static, 0 dynamic; 0 extended) > Outside interfaces: > Ethernet0, Serial0 > Inside interfaces: > Serial1 > Hits: 0 Misses: 0 > Expired translations: 0 > Dynamic mappings: > RTB# > > Notice the 0 static !! > > Now from a client router: > RTC#ping 172.16.11.10 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 172.16.11.10, timeout is 2 > seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip min/avg/max = > 4/5/8 ms > RTC#ping 172.16.6.15 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 172.16.6.15, timeout is 2 > seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip min/avg/max = > 4/5/8 ms > RTC# > > These are the static entries that I had just taken OFF the NAT > router: > > ip nat inside source static 10.10.50.4 172.16.11.70 > ip nat inside source static 10.10.60.4 172.16.11.10 > ip nat inside source static 10.10.70.4 172.16.6.15 > > Any ideas?? > > > _________________________________________________________________ > Join the worlds largest e-mail service with MSN Hotmail. > http://www.hotmail.com > >
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37913&t=37910 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]