Hi, I think that is the routing problem of the remote router, if you can ping the remote LAN ip at local router. The remote router need to add the route to access your local LAN(your pc).
Ivan ""kaushalender"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi group , > > I have cisco 2610 router on which I am using static routing .I have new > customer which is directly connected on my 2610 router.I have problem > that from router i am able to ping the lan ip of the customers end > router but from outside i am not able to ping the customer ip means that > from my machine i am not able to trace the lan ip of the > customer.Althoug I have put route in the router.Can somebody help me in > resolving thip prob. > > The serial of customer at our end > > interface Serial0/3 > description "BACK OFFICE 64-SHARED CIRCUIT" > bandwidth 64 > ip address 216.252.243.9 255.255.255.252 > ip access-group 107 in > ip access-group 107 out > rate-limit input 64000 64000 64000 conform-action transmit > exceed-action drop > rate-limit output 64000 64000 64000 conform-action transmit > exceed-action drop > encapsulation ppp > > The route i have put in router > ip route 216.252.243.32 255.255.255.248 216.252.243.10 > > the output of sh ip route > > > > 64.0.0.0/8 is variably subnetted, 2 subnets, 2 masks > C 64.110.105.76/30 is directly connected, Serial0/0 > C 64.110.93.192/28 is directly connected, Ethernet0/0 > 216.252.243.0/24 is variably subnetted, 10 subnets, 4 masks > S 216.252.243.192/28 [1/0] via 216.252.243.6 > S 216.252.243.176/28 [1/0] via 216.252.243.2 > C 216.252.243.160/28 is directly connected, Ethernet0/0 > C 216.252.243.6/32 is directly connected, Serial0/1 > C 216.252.243.4/30 is directly connected, Serial0/1 > C 216.252.243.2/32 is directly connected, Serial0/2 > C 216.252.243.0/30 is directly connected, Serial0/2 > C 216.252.243.10/32 is directly connected, Serial0/3 > C 216.252.243.8/30 is directly connected, Serial0/3 > S 216.252.243.32/29 [1/0] via 216.252.243.10 > 10.0.0.0/22 is subnetted, 1 subnets > C 10.101.0.0 is directly connected, Ethernet0/0 > S* 0.0.0.0/0 is directly connected, Serial0/0 > > Plz help me Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38094&t=38071 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
