As everyone else suggested, the free way to do it is run MRTG ( www.mrtg.org ). It can be run on Windows and Linux, better and easier to setup on LINUX. You then configure snmp on your 2600. The machine running mrtg will collect the snmp data and make a graph of your traffic utilization over your serial interface. Here is what a sample graph looks like :
http://www.stat.ee.ethz.ch/mrtg/rou-gw-switch-1-lp_129.132.99.91.html It had it installed and running on linux in less than 30 minutes. The other way route is www.solarwinds.net but it costs too much money for me. ""Rafay Aslam"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Guys > I wanted to know traffic utilization on my T1 which is connected with a > Cisco2600 router. > ? > > ""Patrick Ramsey"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > a 486 with 16mb of ram, linux, and mrtg... > > > > -PAtrick > > > > >>> "Rafay Aslam" 03/22/02 11:25AM >>> > > HI Guys > > I wanted to know how much traffic is passing through my T1 or how much > > traffic is utilizing my T1 bandwidth. Tell me the most efficent and > accurate > > way of finding it. > > > > Thanks, > > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any files > transmitted with it may contain confidential and > > /or proprietary information in the possession of WellStar Health System, > > Inc. ("WellStar") and is intended only for the individual or entity to > whom > > addressed. This email may contain information that is held to be > > privileged, confidential and exempt from disclosure under applicable law. > If > > the reader of this message is not the intended recipient, you are hereby > > notified that any unauthorized access, dissemination, distribution or > > copying of any information from this email is strictly prohibited, and may > > subject you to criminal and/or civil liability. If you have received this > > email in error, please notify the sender by reply email and then delete > this > > email and its attachments from your computer. Thank you. > > > > ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39175&t=39167 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
