> Any ideas as how I can configure isl trunking without an Sc0 port on the > supervisor engines?
Your question is not clear. The SC0 port isn't relevant if you are using trunking to connect two switches. All you have to do is "SET TRUNK mod/port ON" on both switches and you are done. If you are talking about routing between VLAN's then you need an RSM or a router that is capable of ISL routing (2621 or better). Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39247&t=39246 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
