Well isn't that a fine "how-do-ya-do ???"
Console> Show Version
WS-C5505 Software, Version McpSW: 4.5(12) NmpSW: 4.5(12)
Copyright (c) 1995-2001 by Cisco Systems
NMP S/W compiled on Apr 19 2001, 17:56:40
MCP S/W compiled on Apr 19 2001, 17:54:16
System Bootstrap Version: 3.1.2
Hardware Version: 1.0 Model: WS-C5505 Serial #: 066552032
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
1 0 WS-X5530 007586158 Hw : 1.5
Fw : 3.1.2
Fw1: 3.1(2)
Sw : 4.5(12)
2 24 WS-X5224 008727049 Hw : 1.4
Fw : 3.1(1)
Sw : 4.5(12)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 32768K 13763K 19005K 8192K 7518K 674K 512K 108K 404K
Uptime is 0 day, 2 hours, 32 minutes
Straight through works like a charm !!! Now the question is, how am I
going to get this thing to work via an Access Server.
Thanks Everyone !!!
Phil
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
Wow
Sent: Saturday, March 23, 2002 10:05 PM
To: [EMAIL PROTECTED]
Subject: Re: Sup III Problems ??? [7:39324]
one of my favorite cisco gotcha's--the cable that you use to connect to
the
console port on a 55XX is different from the regular rollover cable on
every
other cat sup engine.
http://www.cisco.com/warp/public/473/9.html#Cat5000III
Dennis
""Phil Lorenz"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> After catching heck with version 6.3 boot variable and a few other
newer
> commands with the 6509s @ work, I decided to upgrade my home lab from
a
> Sup I Cat5k with a Sup III tote'n Cat55k.
>
>
>
> Problem:
>
> I fired up the switch and it goes through the POST perfectly, but
there
> is no output on the Hyper Term. The Hyper Term and connections check
> out perfectly. I hit the reset button and tried various break
> functions- still nothing. I connected the switch to a router in my
lab
> and this is what I see.
>
>
>
> r1#sh cdp nei detail
>
> -------------------------
>
> Device ID: 066552032
>
> Entry address(es):
>
> Platform: WS-C5505, Capabilities: Trans-Bridge Source-Route-Bridge
> Switch
>
> Interface: FastEthernet0, Port ID (outgoing port): 2/1
>
> Holdtime : 138 sec
>
> Version :
>
> WS-C5505 Software, Version McpSW: 4.5(12) NmpSW: 4.5(12)
>
> Copyright (c) 1995-2001 by Cisco Systems
>
> advertisement version: 1
>
>
>
> Rats !!! No IP address. I have tried various console speeds and
still
> nothing more than this CDP output.
>
>
>
> Any advice or leads ???
>
>
>
> Thanks
>
> Phil
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39329&t=39324
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
