Rajesh > 1. Item 2 : I couldn't get the following things properly : R2 should > have the summarized entry in its routing table if either R5 or R6 > fails.
R5 and R6 are ABR for area 1, and requirements is network on area 1 should be summarized before its enter the area 0. Think of the command for area summarization. > 2. Item 4 : Create an additional loopback on R2 with ip address > 172.0.0.1/16 ( of course this was done !!! ) R1 and R1 should view > this new network as the gateway of last resort. Do not add any > config. statements in R1 or R4 to complete this step. The point here is "Gateway of last resort" and its relationship with classfull routing protocol such RIP and IGRP. Good luck. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39333&t=39292 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
