Hi guys, I did a search on Karl solie End book Labs and here is the tough extract for you guys to get your help and comments.
Q1.A Main frame resides on Vlan2 with three IP Addresses which coreesponds to single MAC address. Configure Router R4(vlan2) to suppot forwarding traffice to single MAC address for all three IP address??? Q2 A large amount of IP fragmentation is occuring on VLAN2.Tune DLSW so that the IP fragmentation will not occur as soon???? Q3. Configure Rx such that workstations on Vlan30 can dynamically locate their default gways.They are not using DHCP?? (Page 1167) Q4 On R2, create a SAP filter blocking all saps starting with "fake" Q5.Configure VLan30 such that saps are advertised onlu when new server comes online? Q6.Configure R1 as an NTP server. Configure peer asssociation such that R4 synchronize with R1. When R4 synchronized allow R2 and R3 to synchronize with R4. If R4 is not Synchronized with R1, R2 and R3 also should not synchronize?? Q7. COnfigure R1 so that when the user Unnamed logs into the router, its immdediately put in enable mode.(pg 1177) Hope u will enjoy... Thanks for u help. TOM _________________________________________________________________ Send and receive Hotmail on your mobile device: http://mobile.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39339&t=39339 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
