The DCE/DTE cable is all you need. On the cable that is marked DCE you must use the "clockrate 64000" under the seral port you are using. If the cable is not marked, do a "show controller int s0" and it will show what serail port is a DCe, which is a DTE. To simulate frame-relay all that is necessary is the "encapsulation frame-relay" under bothe serial interfaces. You should be able to do a "no shut" and both intf should be up. HTH
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39447&t=39441 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]