Hi all, I'm having a problem with bootp. I have a remote site that is connected back to corp via frame relay circuit. The clients at this remote location are using bootp successfully to get network settings, but the printers (tektronics 740;s) can not. When sniffing the frame circuit, I am not seeing any bootp packets (from printers) coming from the e-net int of that router. I have the ip helper config'd on the e-net int, as the clients are working successfully.
Doing a debug on an access list for udp, I get this: 5w6d: UDP: rcvd src=0.0.0.0(68), dst=255.255.255.255(67), length=564 5w6d: BOOTP: opcode 1 on interface FastEthernet0, 46053 secs, 16 hops The bootp requests never gets to serial int. Any ideas what this error is? Thx -- Kevin Keay (N+,CNE,CCSE,CCDP,CCNP) Sr. Network Specialist Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39532&t=39532 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
