in order for pdm to work properly every time you must have an enable password in your pix Timo Graser wrote: I did configure that all. And I am using IE 6.0 so it is MS VM.
Georgescu, Aurelian wrote: >First, you should enable your http server on the PIX, and then you should >allow your workstation IP address to access the http server. Lastly, you >should check your Java VM. Latest PDM only works with Microsoft VM (at least >on my case!) > >Aurelian > > >-----Original Message----- >From: Timo Graser [mailto:[EMAIL PROTECTED]] >Sent: Monday, March 25, 2002 2:34 PM >To: [EMAIL PROTECTED] >Subject: Can't access PIX506 with Browser [7:39449] > >I did a upgrade on my Pix506 from 5.2x to 6.1.2 after that I installed >the pdm. >I did a setup with the Ip address of my station. >When I am connection to https://mystation I get first a signature >window. I accept this with yes, then a login Window pops up I enter >nothing and press return. >Now I get from my browser page not found. >I configured a enable password and tried to login with it-->the same result. > >I am using IE 6.0. >if I do a show ver I see Des is enabled, but I don't see anything about pdm. > >Could somebody please help me? Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39592&t=39449 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]