allowing just one host to access the pix via pdm: http 10.1.10.200 255.255.255.255 inside if you are allowing networks (i.e. 10.1.10.0 255.255.255.0 inside) make sure to remove them. "[EMAIL PROTECTED]" wrote: Don't use the time and date, use the "Cryptochecksum" from the show config command. If the checksum changed from the old one, you know someone was there. Of course I'm assuming you have a backup copy some where to compare the cryptochecksum numbers!
PIX# sh config ssh timeout 5 terminal width 80 Cryptochecksum:kjshfsjhfskjfhsfj 0928023482048240248 (this is the last line in the configuration file) PIX# HTH.....Nabil John Green cc: Sent by: Subject: PIX commands help [7:39544] nobody@groups tudy.com 03/26/2002 12:11 PM Please respond to John Green PIX questions how to find the time/date when the config file was last modified. (to find if any one else has tampered with it) how to find who is telnetted into the pix or who is using the PDM into the pix how to configure a particular IP address to be allowed to manage pix via the PDM and no one else is allowed __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards. http://movies.yahoo.com/ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39587&t=39544 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]