ok, I have a 4700 with a fastE card that is connected to a 5505 switch (port 16).
|---2514 (vlan1) 4700---switch|---2501 (vlan2) |---2509 (vlan3) Port 16 is set for trunking ISL: (snip) Port Mode Encapsulation Status Native vlan ------------------------------------------------------------- 2/16 on isl trunking 3 I have 3 subinterfaces setup on the FastE; fa0.1, fa0.2, fa0.3 each subinterface is IP'ed for 3 different networks; 192.168.1.0,192.168.2.0,192.168.3.0 (respectively): (snip) FastEthernet0.1 is up, line protocol is up Hardware is DEC21140, address is 0050.732e.da0a (bia 0050.732e.da0a) Internet address is 192.168.1.250/24 MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ISL Virtual LAN, Color 1. ARP type: ARPA, ARP Timeout 04:00:00 I have 1 router pugged into each vlan on the switch: (snip) Ethernet0 is up, line protocol is up Hardware is Lance, address is 0010.7be8.72d1 (bia 0010.7be8.72d1) Internet address is 192.168.3.1/24 MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set I have RIP running on all the routers: (snip) Routing Protocol is "rip" Sending updates every 30 seconds, next due in 6 seconds Invalid after 180 seconds, hold down 180, flushed after 240 Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Redistributing: rip Default version control: send version 1, receive any version Interface Send Recv Triggered RIP Key-chain FastEthernet0.1 1 1 2 FastEthernet0.2 1 1 2 FastEthernet0.3 1 1 2 Automatic network summarization is in effect Maximum path: 4 Routing for Networks: 192.168.1.0 192.168.2.0 192.168.3.0 Routing Information Sources: Gateway Distance Last Update Distance: (default is 120) now the problem. I am not getting the rip updates on the other routers. when I do a show ip route on the router connected to vlan 2 for instance: (snip) Gateway of last resort is not set C 192.168.2.0/24 is directly connected, Ethernet0 all I see is the connected network. Nothing from RIP?!? What am I missing?? Thanks, -Joe- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39996&t=39996 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]